#
# To have more informations about Proftpd configuration
# look at : http://www.proftpd.org/
#
# This is a basic ProFTPD configuration file (rename it to
# 'proftpd.conf' for actual use.  It establishes a single server
# and a single anonymous login.  It assumes that you have a user/group
# "nobody" and "ftp" for normal operation and anon.

ServerName         "ProFTPD Default Installation"
ServerType         inetd
DefaultServer         on
UseReverseDNS                   off
IdentLookups                    off
ScoreboardFile         /var/run/proftpd.scoreboard

# Port 21 is the standard FTP port.
Port            21

# Umask 022 is a good standard umask to prevent new dirs and files
# from being group and world writable.
Umask            022

# To prevent DoS attacks, set the maximum number of child processes
# to 30.  If you need to allow more than 30 concurrent connections
# at once, simply increase this value.  Note that this ONLY works
# in standalone mode, in inetd mode you should use an inetd server
# that allows you to limit maximum number of processes per service
# (such as xinetd).
MaxInstances         30

CommandBufferSize      512

# Set the user and group under which the server will run.
User            nobody
Group            nogroup

# To cause every FTP user to be "jailed" (chrooted) into their home
# directory, uncomment this line.
DefaultRoot ~

# Normally, we want files to be overwriteable.
AllowOverwrite      on

# Bar use of SITE CHMOD by default
#<Limit>
#  DenyAll
#</Limit>

# A basic anonymous configuration, no upload directories.  If you do not
# want anonymous users, simply delete this entire <Anonymous> section.
#########################################################################
#                                                                       #
# Uncomment lines with only one # to allow basic anonymous access       #
#                                                                       #
#########################################################################

<Anonymous>
   User            ftp
   Group            ftp

  ### We want clients to be able to login with "anonymous" as well as "ftp"
   UserAlias         anonymous ftp

  ### Limit the maximum number of anonymous logins
   MaxClients         10

  ### We want 'welcome.msg' displayed at login, and '.message' displayed
  ### in each newly chdired directory.
   DisplayLogin         welcome.msg
   DisplayFirstChdir      .message

  ### Limit WRITE everywhere in the anonymous chroot
   <Limit>
     DenyAll
   </Limit>
 
</Anonymous>


LogFormat in "%t %u %a in %b %f"
LogFormat out "%t %u %a out %b %f"
ExtendedLog /var/log/ftpaccess.log read out
ExtendedLog /var/log/ftpaccess.log write in

# This is a basic ProFTPD configuration file (rename it to 
# 'proftpd.conf' for actual use.  It establishes a single server
# and a single anonymous login.  It assumes that you have a user/group
# "nobody" and "ftp" for normal operation and anon.

ServerName			"ProFTPD Default Installation"
ServerType			standalone
DefaultServer			on

# Port 21 is the standard FTP port.
Port				21

# Umask 022 is a good standard umask to prevent new dirs and files
# from being group and world writable.
Umask				022

# To prevent DoS attacks, set the maximum number of child processes
# to 30.  If you need to allow more than 30 concurrent connections
# at once, simply increase this value.  Note that this ONLY works
# in standalone mode, in inetd mode you should use an inetd server
# that allows you to limit maximum number of processes per service
# (such as xinetd).
MaxInstances			30

RequireValidShell		off

# Set the user and group under which the server will run.
User				nobody
Group				nogroup

# To cause every FTP user to be "jailed" (chrooted) into their home
# directory, uncomment this line.
#DefaultRoot ~

# Normally, we want files to be overwriteable.
AllowOverwrite		on

# Bar use of SITE CHMOD by default
<Limit>
  DenyAll
</Limit>

# A basic anonymous configuration, no upload directories.  If you do not
# want anonymous users, simply delete this entire <Anonymous> section.
<Anonymous>
  User				ftp
  Group				ftp

  # We want clients to be able to login with "anonymous" as well as "ftp"
  UserAlias			anonymous ftp

  # Limit the maximum number of anonymous logins
  MaxClients			10

  # We want 'welcome.msg' displayed at login, and '.message' displayed
  # in each newly chdired directory.
  DisplayLogin			welcome.msg
  DisplayChdir			.message

  # Limit WRITE everywhere in the anonymous chroot
  <Limit>
    DenyAll
  </Limit>
</Anonymous>

<VirtualHost>
<Anonymous>
   User				ftp
   Group				ftp

  ### We want clients to be able to login with "anonymous" as well as "ftp"
   UserAlias			anonymous ftp

  ### Limit the maximum number of anonymous logins
   MaxClients			5

  ### We want 'welcome.msg' displayed at login, and '.message' displayed
  ### in each newly chdired directory.
   DisplayLogin			welcome.msg
   DisplayFirstChdir		.message

  ### Limit WRITE everywhere in the anonymous chroot
   <Limit>
    DenyAll
</Limit>
<Directory>
<Limit>
AllowAll
</Limit>
<Limit>
DenyAll
</Limit>
</directory>

   
</Anonymous>
</VirtualHost>